Basic Navigation - THOMSON Wireless Business DSL Routers SpeedTouchTM620 Operator's Manual

2.3 Basic Navigation

Command group
navigation
E-DOC-CTC-20051017-0155 v1.0
From the top level, you can change to a command group by executing the name of
the desired command group (for example type the name of the command group
and press ENTER).
To obtain a list of all available command groups, use the
top level:
=>:help
Following commands are available :
help : Displays this help information
menu : Displays menu
? : Displays this help information
exit : Exits this shell.
.. : Exits group selection.
saveall : Saves current configuration.
ping : Send ICMP ECHO_REQUEST packets.
traceroute : Send ICMP/UDP packets to trace the ip path.
telnet : Open a telnet connection to a server.
Following command groups are available :
firewall service
dhcp dns
expr ids
adsl atm
env hostmgr
language mbus
ppp pptp
sla snmp
syslog system
wireless
The exact list of available command groups depends on the type of
SpeedTouch™, the number and kind of activated software modules and on
the current version of the SpeedTouch™ System software.
To return to top level, or to go up one level (in case of nested command groups),
type two dots and press ENTER.
SpeedTouch™ Command Line Interface
help command from the
autopvc connection
dsd dyndns
igmp ip
capi config
interface ipqos
memm mlp
rcapi router
sntp software
tunnel upnp
Chapter 2
cwmp
eth
isdn
debug
label
nat
script
ssh
user
7