Table of Contents
Advertisement
Chapter 8
SpeedTouch™ Remote Access
About CWMP
Architecture
Supported Features
Configuration Options
108
8.8 CPE WAN Management Protocol (CWMP)
Support (TR-069)
The SpeedTouch™ supports the DSL Forum's TR-069 Technical Report on CWMP.
This allows the SpeedTouch™ to be configured and monitored from a management
application running on a remote Auto-Configuration Server (ACS). For more
information, refer to the DSL Forum's technical report TR-069 "CPE WAN
Management Protocol".
In any regular scenario, the ACS sets all connection request parameters to
their required values when the SpeedTouch™ connects to the ACS for the
first time.
The diagram below shows the CWMP architecture for the SpeedTouch™:
Customer premises network
The TR-069 functionality as supported by the SpeedTouch™ has the following
features:
Start-up mechanism (including Remote Inventory) with support of SSL and
DNS name resolution for ACS
Transfer of files (firmware, configuration file, script file).
Data model supporting the following use cases: auto-provisioning, integrated
service activation, wireless LAN, diagnostics.
It is impossible to configure the CWMP parameters via the Web interface. Only CLI
commands can be used.
SpeedTouch
DSLAM
ACS Server
ACS
ISP-1
BRAS
E-DOC-CTC-20051017-0155 v1.0
Advertisement
Table of Contents
