THOMSON Wireless Business DSL Routers SpeedTouchTM620 Operator's Manual page 139

CLI Parameters:
E-DOC-CTC-20051017-0155 v1.0
The table below provides a description of the relevant parameters. Do not alter the
default value of the parameters not shown in this table:
Parameter Value
intf text string
dest text string
user text string
password text string
auth pap, chap or auto
restart enabled or disabled
retryinterval numeric
passive enabled or disabled
silent enabled or disabled
echo enabled or disabled
mru numeric
ladrress IP address
radress IP address
netmask Format depends on
the format setting
format cidr, dotted or none
savepwd enabled or disabled
The Integrated SpeedTouch™ ISDN Modem
Description
name of the PPP interface
name of the ISDN interface on which
the PPP connection is built
Username needed for the PPP
connection
Password needed for the PPP
connection
Sets the authentication protocol
Enable or disable the retry function.
This means that the system will try
again if establishing the link fails.
If the connection fails, and restart is
enabled, the system will retry
establishing the connection after this
interval.
Enable or disable passive mode
Enable or diable silent mode
Enable or disable echo
Local IP address of the PPP
connection. This is completed
automatically when establishing the
connection. Do not fill it in manually.
Remote IP address of the PPP
connection. This is completed
automatically when establishing the
connection. Do not fill it in manually.
Netmask for the ppp connection.
This is completed automatically
when establishing the connection.
Do not fill it in manually.
Set the format of the netmask to cidr
or dotted , or use no netmask.
Save the pasword. After establishing
the ppp link for the first time, you no
longer need to provide it for
subsequent connections.
Chapter 9
129