Lower Layer Diagnostics - THOMSON Wireless Business DSL Routers SpeedTouchTM620 Operator's Manual

11.3.2 Lower Layer Diagnostics

ADSL
E-DOC-CTC-20051017-0155 v1.0
The displays ADSL statistics and information on current
:adsl info
SpeedTouch™ DSL line status.
Although it is the same command for both SpeedTouch™ ADSL/POTS and ADSL/
ISDN variants, the command features specific output parameters and counters per
variant. ADSL reporting has been extended to report the unrestricted ADSL
bandwidth, i.e. the bandwidth the line would have if the DSLAM would not be
configured to limit ADSL bandwidth.
The partial example below shows ADSL diagnostics for an ADSL/ISDN variant:
=>:adsl info
Modemstate :
Operation Mode :
Channel Mode :
Number of resets :
Vendor
Country :
Vendor :
VendorSpecific :
StandardRevisionNr :
Margin [dB] :
Attenuation [dB] :
OutputPower [dBm] :
Available Bandwidth
Downstream :
Upstream :
Transfer statistics
Errors
Received FEC :
Received CRC :
Received HEC :
Transmitted FEC :
Transmitted CRC :
Transmitted HEC :
Near end failures since reset
Loss of frame:
Loss of signal:
Loss of power:
Errored seconds:
Near end failures last 15 minutes
Loss of frame:
Loss of signal:
Loss of power:
Errored seconds:
Near end failures current day
Errored seconds:
Near end failures previous day
Errored seconds:
=>
SpeedTouch™ Advanced Diagnostics
up
G.992.1 Annex B
fast
1
Local
0f
TMMB
0000
00
Downstream
9.0
1.0
7.0
Cells/s
18867
1886
0
0
0
0
0
0
0 failures
0 failures
0 failures
0 seconds
0 seconds
0 seconds
0 seconds
0 seconds
0 seconds
0 seconds
Chapter 11
Remote
00
0000
00
Upstream
6.0
0.0
8.5
Kbit/s
8000
800
181