How to Configure the
CWMP Server:
Syntax
How to Configure the
CWMP Server:
Parameter Description
E-DOC-CTC-20051017-0155 v1.0
From the cwmp server prompt, use the following commands to configure the
CWMP Server parameters:
config
[url = <string>]
[username = <string>]
[password = <string>]
The CLI command uses the following parameters:
Parameter
Value
url
text string
username
text string
password
text string
SpeedTouch™ Remote Access
Description
URL used to contact the ACS server.
User name for ACS Digest Authentication
Password for ACS Digest Authentication
Chapter 8
111