Table of Contents
Advertisement
Restoring a
configuration via the
expert pages
E-DOC-CTC-20051017-0155 v1.0
Proceed as follows:
Step
Action
1
Open a web browser and go to the SpeedTouch™ Web Interface.
2
Go to expert mode.
3
Open the Upgrade page via Home > SpeedTouch > System Update:
4
Click Browse to locate the configuration file on your local disk you
intend to restore. Select the file and click OK.
5
Click Upload to transfer the configuration file to the SpeedTouch™.
Be aware that by uploading a new configuration also the IP configuration of
the SpeedTouch™ may have been changed. In that case the information
logging as described above procedure will not be shown. To save the new
configuration, you must browse to the SpeedTouch™ Web Interface using
its new IP address, and click Save All.
SpeedTouch™ Configuration Management
Chapter 4
29
Advertisement
Table of Contents
