About Cli Diagnostics - THOMSON Wireless Business DSL Routers SpeedTouchTM620 Operator's Manual

Chapter 11
SpeedTouch™ Advanced Diagnostics

11.3.1 About CLI Diagnostics

Introduction
Accessing the CLI
Diagnostical CLI
commands
180
This section describes some of the diagnostics available from the SpeedTouch™
Command Line Interface (CLI).
For a full description of the CLI commands see the "SpeedTouch™ CLI Reference
Guide" for more information.
You can access the CLI through:
The SpeedTouch™ CLI Web Interface
A Telnet session
The serial Console interface
See "2 SpeedTouch™ Command Line Interface" on page 5
Most CLI command groups feature one or more diagnostical commands. this
chapter provides a brief description of these commands.
For a full description, refer to the "SpeedTouch™ CLI Reference Guide".
Traces
The following CLI commands feature traces:
adsl config
connection appconfig
connection debug
cwmp traceconfig
dhcp client debug traceconfig
dhcp relay debug traceconfig
dhcp server debug traceconfig
dns client config
dns server config
dyndns modify
firewall debug traceconfig
firewall rule debug traceconfig
for more information.
grp config
grp rip config
hostmgr config
ids config
ip debug traceconfig
isdn debug traceconfig
label modify
label rule debug traceconfig
mlp debug traceconfig
mlp import
nat config
ppp ifconfig
E-DOC-CTC-20051017-0155 v1.0