Content Based Filtering
Overview
E-DOC-CTC-20051017-0155 v1.0
With content based filtering, you can block or allow access to web sites based on
their content. To do this, you can apply a content level as filter. You can use (an, if
necessary, customize) one of the predefined content levels or create your own. The
following is an example of (part of) a content level:
Note that "x" marks forbidden content while "v" marks allowed content.
This section covers the following topics:
Section
"6.3.1 The Website Filtering Configuration Pages"
"6.3.2 How to Verify the Filtering Configuration"
"6.3.4 Configuring the Actions for Uncategorised Sites"
"6.3.5 How to Create an Address Based Filter"
"6.3.6 How to Create a Content Based Filter"
"6.3.7 How to Create a Content Level"
Chapter 6
SpeedTouch™ System Services
See Page
62
63
66
67
68
69
61