How To Allow Access To The Snmp Agent - THOMSON Wireless Business DSL Routers SpeedTouchTM620 Operator's Manual

Chapter 10
SpeedTouch™ Monitoring

10.2.1 How to Allow Access to the SNMP Agent

Default Setting
Command
140
By default, access to the SNMP Agent is disabled. Before you are able to use SNMP,
you must enable it.
Use the following command to allow access to the SNMP Agent:
:service system modify name=SNMPV3_AGENT state=enabled
E-DOC-CTC-20051017-0155 v1.0