Table of Contents
Advertisement
10.2.2 How to View the SNMP Configuration
About the SNMP
Service
Command
E-DOC-CTC-20051017-0155 v1.0
The SpeedTouch™ SNMP service controls all SNMP traffic from and towards the
SpeedTouch™. By default, no restrictions apply regarding SNMP traffic from and
towards the local network. However SNMP traffic from and towards the WAN will
be blocked.
Use the following command to view the SNMP configuration:
:service system list name SNMPV3_AGENT expand enabled
This returns the following output:
Description................ Rx snmp GET, SET and GETNEXT PDUs
Properties................. server
Attributes................. state port aclip aclif aclifgroup map log
User Managed Attributes.... state aclip aclif aclifgroup map log
Attribute Values :
State...................... (administratively) disabled
Port....................... 161
Ip Access List............. any
Interface Access List...... any
Interface Group Access List any
Map List................... 161
Logging.................... disabled
You can the same command to view the SNMPV3 Traps:
:service system list name=SNMPV3_TRAPS expand=enabled
Chapter 10
SpeedTouch™ Monitoring
141
Advertisement
Table of Contents
