Table of Contents
Advertisement
How to Create a
Destination for
theTraps
How to Enable Traps
More Information
E-DOC-CTC-20051017-0155 v1.0
Use the
:snmp target add
Example:
:snmp target add name=Test_trap_pc addr=10.0.0.110 taglist=Trap_tag
params=Trap_params
Use the following command sequence:
:snmp config traps enabled
:service system modify name SNMPV3_TRAPS state enabled
For more information about these commands, refer to the CLI Command Guide
command.
Chapter 10
SpeedTouch™ Monitoring
159
Advertisement
Table of Contents
