Igd Control Agent - THOMSON SpeedTouch 605 User Manual

(wireless) business dsl routers
Hide thumbs Also See for SpeedTouch 605:
Table of Contents

Advertisement

3.2 IGD Control Agent

Introduction
Preconditions
Starting an Internet
session
E-DOC-CTC-20050429-0104 v1.0
MS Windows XP users can easily establish PPP sessions, thanks to MS Windows
XP's Internet Gateway Device (IGD) Discovery and Control Client that allows you to
control the SpeedTouch™ directly from you PC.
The IGD control client only allows to connect or to disconnect a fully
configured connection.
Following conditions must be met:
Following subcomponents of Windows XP's Networking Services must be
added to your Windows XP system:
UPnP™ (see
" SpeedTouch™ not detected by UPnP™ or IGD Control Client"
on page
197).
IGD Discovery and Control Client (see
Control" on page
UPnP™ must be enabled on your SpeedTouch™. To enable UPnP, see
"4.5.2 Game & Application Sharing" on page
Proceed as follows:
In the Windows task bar, click Start.
1
Select (Settings >) Control Panel.
2
The Control Panel window appears. Go to (Network and Internet Connections
3
>) Network Connections.
The Network Connections window appears:
4
You will find an Internet Gateway icon, representing the SpeedTouch™ IGD
Internet connection ability.
Double-click the Internet Connection icon.
5
As a result the SpeedTouch™'s embedded PPP dial-in client establishes the
Internet connection. The Internet Gateway icon displays connected and your
PC is online.
You can open a web browser and surf the Internet.
6
" Adding IGD Discovery and
198).
69.
Chapter 3
Internet Connectivity Dial-In Clients
37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Speedtouch 608Speedtouch 608 wlSpeedtouch 620

Table of Contents