Adjusting Ringer Pitch; Handset Receiver Volume; Adjusting Handset Receiver Volume; Speaker Volume - Mitel 5215 Administration Manual

Adjusting Ringer Pitch

To adjust the ringer pitch on your phone:
1. Press Superkey, and then press >> until SETTINGS & OPTIONS? appears on the
display.
2. Press OK, and then press ▼ until RINGER SOUNDS? appears on the display.
3. Press OK, and then press NO until SET RINGER PITCH? appears on the display.
4. Press YES. The phone starts to ring.
5. Press or
information is saved, SET RINGER PITCH? appears on the display.
6. Do one of the following:
• To return to the main menu, press NO.
• To return to the default display, press Superkey.

Handset Receiver Volume

Adjusting Handset Receiver Volume

To adjust the handset receiver volume when you are using the handset:
• Press and
again.
Note: If your phone loses power, the settings will return to the default settings.

Speaker Volume

Adjusting Speaker Volume

To adjust the speaker volume when on a handsfree call:
• Press
and
again.
Note: If your phone loses power, the settings will return to the default settings.

Display Contrast

Adjusting Display Contrast

You can adjust the display contrast of your 5215 or 5220 IP Phone to suit your preference.
To adjust the display contrast of your phone:
to adjust the pitch to the desired level, and then press SAVE. After the
, and then hang up. The new setting stays in effect until you change it
, and then hang up. The new setting stays in effect until you change it
- 13 -
Customizing Your Phone