Chapter 4: Server configuration
6. Click Continue.
7. Complete the following information for Ethernet 2:
IP address
Gateway
Subnet mask
Speed
8. Verify with the network administrator that the LAN hardware supports 802.1q priority
tagging. If supported, select VLAN 802.1q priority tagging.
9. Click Change. The system displays the status of the configuration update.
When the update is complete, the system displays the following message:
Successfully configured ethernet interfaces.
Release the server
Unplug the cross-over cable from the Services port on the back of the server.
Clearing the ARP cache on the laptop
52
Installing and Configuring the Avaya S8500 Server
on page 35
January 2008