Adjusting The Film Feed Signal - Kodak X-Omat 480 RA Service Manual

Adjusting the Film Feed Signal

The adjustment for the sound of the FILM FEED SIGNAL is controlled by POTENTIOMETER
R5644 on the 5600 CIRCUIT BOARD.
[1] To adjust the sound of the FILM FEED SIGNAL, rotate POTENTIOMETER R5644 clockwise
increase the sound and counterclockwise
ALIGNMENT TOOL.
6-2
NOTE
to decrease the sound. Use a POTENTIOMETER
Figure 6-1 Adjusting Loudness
POTENTIOMETER R5644
to
H108_0158DCB
H108_0317DA
246616