Table of Contents
Advertisement
Removing the Developer Heat Exchanger
IMPORTANT
For this procedure the processor must
be deenergized. See page 1-7. In
addition, the TOP COVER and both
SIDE ACCESS PANELS must be
removed from the processor. See
page 1-3 through 1-5 for instructions, if
necessary. Also make sure that the
water supply to the processor is shut
off for this procedure.
[1]
Drain the DEVELOPER TANK by opening the
DEVELOPER DRAIN VALVE on the FEED
END of the processor.
246616
DEVELOPER
DRAIN VALVE
Figure 5-9 Opening the Drain Valve
H108_0004CCE
H108_0004CA
5-11
Advertisement
Table of Contents
