Removing The Developer Filter Canister - Kodak X-Omat 480 RA Service Manual

Removing the Developer Filter Canister

IMPORTANT
For this procedure the processor must
be deenergized. See page 1-7. In
addition, the TOP COVER must be
removed from the processor. See
pages 1-3 through 1-5 for instructions,
if necessary.
[1] Drain the DEVELOPER TANK by opening the
DEVELOPER DRAIN VALVE on the FEED
END of the processor.
246616
DEVELOPER
DRAIN VALVE
Figure 5-7 Opening the Developer Drain Valve
H108_0004CCE
H108_0004CA
5-9