Energizing the Processor
[1]
Move the wall power switch to the ''ON'' position.
[2]
Move the AUXILIARY CIRCUIT BREAKERS, CB2, CB3, and CB4 to the ''I'' position.
[3]
Move the MAIN CIRCUIT BREAKER, CB1, to the ''I'' position.
Deenergizing the Processor
[1]
Move the MAIN CIRCUIT BREAKER, CB1, to the ''O'' position.
[2]
Move the wall power switch to the ''OFF'' position.
[3]
Attach the MAGNETIC POWER WARNING SIGN, TL-1926, to the wall power switch indicating that the
processor is being serviced.
246616
MAIN CIRCUIT
BREAKER CB1
AUIXILIARY CRICUIT
BREAKERS CB2, CB3, CB4
Figure 1-7 Feed-End of Processor
H108_0004CCD
H108_0004CA
1-7