Overview of Processor
Many of the following procedures require that the processor be deenergized before the procedure is begun.
Many of the procedures also require that the TOP COVER and 6 ACCESS PANELS be removed from the
processor before the procedure is begun. For your convenience, illustrations showing the location of the TOP
COVER, ACCESS PANELS, MAIN CIRCUIT BREAKER, RACKS, CROSSOVERS, and other major components
appear on the following pages.
CONTROL PANEL
FEED-END
LOWER ACCESS PANEL
FILM EXIT TRAY
RECEIVING END
ACCESS PANEL
246616
Figure 1-1 Feed-End View of Processor
Figure 1-2 Receiving-End View of Processor
NON-DRIVE SIDE
ACCESS PANEL
FEED-END
MIDDLE ACCESS PANEL
TOP COVER
DRIVE SIDE
ACCESS PANEL
DRYER PANEL
H108_0137BCA
H108_0319BA
H108_0233BCB
H108_0318BA
1-3