Adjusting The Dryer Belt Tracking - Kodak X-Omat 480 RA Service Manual

Adjusting the Dryer Belt Tracking

For this procedure the processor must be deenergized. See page 1-7. In addition, the TOP
COVER and the RECEIVING-END ACCESS PANEL must be removed from the processor. See
pages 1-3 through 1-5 for instructions, if necessary.
[1] Disconnect the WATER HOSE from the FIXER/WASH CROSSOVER.
DEVELOPER/FIXER
CROSSOVER
DETECTOR
CROSSOVER
ASSEMBLY
Figure 4-13 Disconnecting the Hose from the Fixer/Wash Crossover
[2] Remove the FILTER BEZEL and SPLASH
GUARD.
4-14
IMPORTANT
WASH WATER
HOSE
FILTER
BEZEL
Figure 4-14 Removing the Filter Bezel
FIXER/WASH
CROSSOVER
H108_0238BCA
H108_0238BA
SPLASH GUARD
H108_0068ACC
H108_0068AA
246616