Step 2 : Set The Machine Selection - Roland monoFab SRM-20 User Manual

〇●〇〇〇〇〇〇〇

STEP 2 : Set the Machine Selection

Configure MODELA Player 4 so that it can output data to the cutting
machine.
IMPORTANT
Unless a machine setup is performed, a right setup or output cannot be
performed.
1.
Click [File] - [Select Machine].
2.
Set the machine selection.
2-1.
[SRM-20]
Model Name :
2-2.
Command Set : [RML-1] Spindle Unit :
2-3.
[Roland SRM-20]
Printer Name :
2-4.
Click [OK].
35
Create Cutting Data By MODELA Player 4
[Standard]