Step 3 : Confirm The Command Set - Roland monoFab SRM-20 User Manual

〇〇●〇

STEP 3 : Confirm the Command Set

Select the appropriate command mode to match the software to be used.
(p. 15)
""Command Set"
NC Code file outputting
(p. 81)
""NC Code"
CAUTION
If a command that is sent to the machine is different from the command set
selected on the VPanel, an error occurs and the machine will not be able to
carry out the cutting command.
Command Set Setting
1.
Click [Setup].
2.
Select the suitable command set.
"Piano.stl" : [RML-1] [OK]

65
Preparing the Machine