Main Specifications - Roland monoFab SRM-20 User Manual

Main Specifications

Cuttable material
X, Y, and Z operation strokes
Distance from collet tip to table
Table size
Loadable workpiece weight
X-, Y-, and Z-axis drive system
Operating speed
Software resolution
Mechanical resolution
Spindle motor
Maximum spindle rotation
Cutting tool chuck
Interface
Control command sets
Machine
Power
requirements
Dedicated AC adapter
Power consumption
During standby
Operating noise
During operation
(when not cutting)
External dimensions
Weight
Installation Environment
Included items
SRM-20
Resins such as chemical wood and modeling wax (metal not supported), substrates for machining
203.2 (X) x 152.4 (Y) x 60.5 (Z) mm ( 8 (X) x 6 (Y) x 2.38 (Z) inches )
Maximum 130.75mm ( 5.15 inches)
232.2 (X) x 156.6 (Y) mm ( 9.14 (X) x 6.17 (Y) inches)
2 kg ( 4.4 lbs)
Stepping motor
6 ~ 1800 mm/min ( 0.24 ~ 70.87 inches/min)
0.01 mm/step (RML-1), 0.001mm/step (NC code)
( 0.00039 inches/step (RML-1), 0.000039 inches/step (NC code))
0.000998594 mm/step ( 0.0000393 inches/step)
DC motor Type 380
7,000 rpm
Collet method
USB
RML-1, NC code
DC24V, 2.5A
±
AC 100V 10%, 50/60Hz
Approx. 55W
45 dB (A) or less
65 dB (A) or less
451.0 (W) x 426.6 (D) x 426.2 (H) mm ( 17.76 (W) x 16.80 (D) x 16.78 (H) inches)
19.6 kg ( 43.2 lbs)
Temperature of 5 to 40°C (41 to 104 °F), 35 to 80% relative humidity (no condensation)
USB cable, AC adapter, Power cord, Cutting tool, Collet, Set screw, Spanners (7,10mm / 0.28, 0.39 inches), Hexagonal
wrench (size 2, 3 mm /0.08, 0.12 inches), Positioning pins, Double-sided tape, Start-up page information card, Read
first (Booklet)
121
Specifications