Roland monoFab SRM-20 User Manual page 112

4.
Switch off the power and unplug the AC adapter from the power
outlet.
WARNING Always unplug the power cord when attaching
or removing parts and optional parts.
Attempting such operations while the machine is
connected to a power source may result in injury
or electrical shock.
CAUTION Under no circumstances move the spindle
unit or table with your hands.
Doing so may cause a breakdown.
5.
Remove the spindle unit.
5-1.
Remove the screws in the locations shown in the figure using a
hexagonal wrench. (2 places)
5-2.
Pull the spindle unit straight out and remove it.
Attach the Spindle Unit
"Remove the Spindle Unit"
Perform the procedure 5 of
order.
""The attachment position of a spindle"
CAUTION
If cutting waste builds up in the spindle unit or on the installation surface,
the unit may be secured in place on an angle, resulting in problems.
Thoroughly remove cutting waste.
112
What to Do If...
(p. 111) in reverse
(p. 113)