Replacement Of The Consumable Parts; Caution And Note For Replacement Of The Consumable Parts; Consumable Parts; Replacement Cycles And Replacement Methods Of Consumable Parts - Roland monoFab SRM-20 User Manual
Caution and Note for Replacement of the Consumable Parts
•
There are various consumable parts in this machine. To request consumable parts, visit the Roland DG website. ( http://www.rolanddg.com/ )
•
If you have any questions, refer to the Roland DG website (http://www.rolanddg.com/). If you cannot access the website, contact your authorized Roland DG
Corp. dealer.
•
Use the specified consumable parts.
Replacement Cycles and Replacement Methods of Consumable Parts
Please check the following table for the types of consumable parts and the replacement cycle guidelines and replacement methods for them.
Consumable parts
Spindle Motor
Spindle Unit
Collet
Table
Standard replacement periods
500 hours
""Confirm the Total Spindle Motor Rotation Time"
(p. 97)
1000 hours
When required at the time of cutting tool replacement
When the table is broken
Replacement method
Refer the manual included with the consumable part
""Run in the Spindle"
Refer the manual included with the consumable part