Z Cutting Range By Changing The Position Of The Spindle Unit - Roland monoFab SRM-20 User Manual

Cutting Area

Z Cutting Range by Changing the Position of the Spindle Unit

There are two attachment positions (height) of a spindle unit. It uses properly with the length of a cutting tool, and the thickness of material.
(p. 111)
""Changing the Position of a Spindle Unit"
Initial setting : Low position
Spindle Unit Attachment Position
Low position High position
Working range of the spindle unit
approx.60.5 mm
Working range of the spindle unit
approx.60.5 mm
approx. 130.75mm
approx. 100.75 mm
approx. 70.25 mm
approx. 40.25 mm
27