Step 4 : Remove Processed Material - Roland monoFab SRM-20 User Manual

〇〇〇●〇

STEP 4 : Remove Processed Material

MEMO
The power is automatically turned OFF after a certain time of period passes
as the machine is not operated*.
* When the table and spindle head stop moving (Except when processing is
suspended)
(p. 15)
""Power Option"
1.
Click [View] of VPanel.
2.
Remove the cutting waste and the material.
Remove the double-stick tape on the back of the material.
When material cannot remove finely, it removes using
wooden spatulas etc.
The piano can be cut out by making the depth of the
cutting deeper than the cutting data. (* A scrap board is
necessary."Scrap Boards"
When combined with the piano legs data (Piano_leg.stl), the
result is shown in the figure below.
79
Cutting (One Side Cutting)
(p. 24)