Important Notes On Care And Maintenance - Roland monoFab SRM-20 User Manual

Important Notes on Care and Maintenance

WARNING Never use a pneumatic blower.
This machine is not compatible with a pneumatic blower. Cutting waste may get inside the machine and cause fire or electrical shock.
WARNING Never use gasoline, alcohol, thinner, or any other flammable material for cleaning.
Doing so may cause fire.
WARNING Always unplug the power cord when attaching or removing parts and optional parts.
Attempting such operations while the machine is connected to a power source may result in injury or electrical shock.
WARNING When using a dust collector to collect cutting waste, exercise caution to prevent fire and explosions of dust.
Using an ordinary dust collector to collect fine cuttings may lead to fire or explosions. Contact the dust collector manufacturer to check whether the dust
collector can be used to collect cutting waste. If you cannot confirm that it is safe to use the dust collector, use a brush or similar tool to collect
cutting waste. Do not use the dust collector.
CAUTION Caution: high temperatures.
The cutting tool and spindle motor become hot. Exercise caution to avoid fire or burns.
CAUTION Do not touch the tip of the blade with your fingers.
Doing so may result in injury.
CAUTION Be sure to follow the procedure provided in this manual. You must not touch any parts except for those specified in the instructions.
An unexpected operation of the machine may cause injury and burn.
•
This machine is a precision device. Carry out daily care and maintenance.
• Carefully clean away cutting waste. Operating the machine with a large amount of cutting waste present may cause malfunction.
•
Never apply silicone substances (oil, grease, spray, etc.) to the machine. Doing so may cause poor switch contact.
92