Step 5 : Set The Margin - Roland monoFab SRM-20 User Manual

〇〇〇〇●〇〇〇〇

STEP 5 : Set the Margin

Margin
Make settings for the space around the model to provide approach paths
for the cutting tool.
1.
Click [Modeling Form].
2.
Select the margin setting.
"Piano.stl" [Automatic] [OK]
: 
[Automatic]
Sets a front and rear, right and left margin of 6.85 mm.
[Manual]
Enter the desired margin space.
40
Create Cutting Data By MODELA Player 4