Roland monoFab SRM-20 User Manual page 46

6.
Set the tool path.
"Piano.stl" : [Scan Lines]  [Next]
Tool Path
This is the path that is drawn when the cutting tool cuts into the material. Depending on
the CAM software used, there are many tool paths for each application.
MODELA Player4 has the following tool paths.
Name Preview
Scan Lines
X
Y
Uni-
directional
X
Y
Contour
Lines
Spiral
46
Create Cutting Data By MODELA Player 4
Feature
This creates a tool path parallel to the
specified axis. (Parallel with X axis)
The path is created in such a way that
the outbound movement and return
movement lie along the axis.
This creates a tool path parallel to the
specified axis. (Parallel with Y axis)
The path is created in such a way that
either only the outbound movement
or only the return movement lie
along the axis.
This creates a tool path that lies
along the contour lines when you're
cutting the model into rings on the
XY plane.
This creates a spiral tool path.
Appropriate
cutting method
Surface
leveling /
Finishing
Surface
leveling /
Finishing
Roughing /
Finishing
Finishing