The Power Turns Off After Cutting Ends; The Cutting Tool Does Not Reach The Material; The Driver Cannot Be Installed - Roland monoFab SRM-20 User Manual

The Power Turns Off After Cutting Ends

The Auto-Power-Off Function is Set Up
The power is automatically turned OFF after a certain time of period passes
as the machine is not operated*.
* When the table and spindle head stop moving (Except when processing is
suspended)
The set period of an auto-power-off function can be changed.
(p. 15)
""Power Option"

The Cutting Tool Does Not Reach the Material

Are You Using a Scrap Board?
If the cutting tool does not reach the material and cannot cut it, use a scrap
board.
(p. 24)
""Scrap Boards"

The Driver Cannot Be Installed

If installation quits partway through, or if the wizard does not appear when
you make the connection with a USB cable, take action as follows.
Windows 8/8.1
1.
Use a USB cable to connect the machine and the computer, and
then turn the machine on.
2.
If the "Found New Hardware"
Disconnect any USB cables for printers other than this machine.
3.
On the task bar, click [Start], and then [Desk top]. Move the mouse
to the lower right corner to display Charm and click [Set].
4.
Click [Control Panel], [Hardware and Sound], and then [Device Manager].
"User Account Control"
When the
"Device Manager"
The window appears.
5.
[Show hidden devices]
Click
6.
Double-click [Printers] or
model name or [Unknown device], whichever appears below the
item you selected.
7.
Click [Delete] on the [Action]
8.
In the "Confirm Device Uninstall"
the driver software for this device]. check box, and then click
to close the "Device Manager."
105
What to Do If...
wizard appears, click [Cancel]
dialog box appears, click [Continue].
[View]
on the menu.
[Other devices] in the list. Click the
menu.
dialog box, select the
to close it.
[Delete
[OK]