Step 4 : Set The Material - Roland monoFab SRM-20 User Manual

〇〇〇●〇〇〇〇〇

STEP 4 : Set the Material

Select the quality of the material. Set the type of prepared material.
(p. 24)
""Material Types"
MEMO
Set up the quality of the material before process creation.
Because changing the composition also produces changes in the cutting
tool and the cutting parameters, changing the composition after you have
created the processes is not recommended.
1.
Select the type of material to use from the materials pull-down
menu.
39
Create Cutting Data By MODELA Player 4