Step 2 : Set The Machine Selection - Roland monoFab SRM-20 User Manual

〇●〇〇〇〇〇〇〇

STEP 2 : Set the Machine Selection

Configure MODELA Player 4 so that it can output data to the cutting
machine .
IMPORTANT
Unless a machine setup is performed, a right setup or output cannot be
performed .
Procedure
1.
[File] [Select Machine].
Click -
2.
Set the machine selection.
2-1.
[SRM-20]
Model Name :
2-2.
Command Set : [RML-1]
2-3.
[Roland SRM-20]
Printer Name :
2-4.
Click [OK] .
53
Creating a MODELA Player 4 File
Spindle Unit : [Standard]