Table of Contents
Advertisement
Installing the Machine
Step 1 : Deciding on an Installation Site
Placement and Installation
WARNING
The weight of the machine alone is 120 kg (265 lb.). Unload and place the machine with care.
• When lifting the machine, hold the locations indicated with the arrows in the following figure.
Installation Environment
Install the machine in a level, stable location offering good operating conditions. An unsuitable location can
cause accidents, fire, faulty operation, or breakdown.
WARNING
WARNING
WARNING
WARNING
WARNING
18
Unloading and placement are operations that must be performed by 4
people or more.
Tasks that require undue effort when performed by a small number of people
may result in physical injury. Dropping the machine may result in injury.
Install the machine in a location that is level, stable, and able to bear the
weight of the machine.
The total weight of the machine may reach 140 kg (309 lb.) or more. Installation
in an unsuitable location may cause a major accident, including tip over, fall,
or collapse.
Never install the machine in a location exposed to open flame.
Cutting waste may ignite. Powdered material is extremely flammable, and even
metal material may catch fire.
Never place any flammable object nearby. Never use a combustible aerosol
spray nearby. Never use the machine in any location where gases can
accumulate.
Combustion or explosion may occur.
Never use the machine outside or in any location where exposure to water
or high humidity may occur. Do not touch the power cord, plug, or power
outlet with wet hands.
Doing so may result in fire or electrical shock.
Install the machine so that the power plug is within immediate reach at all times.
This is to enable quick disconnection of the power plug in the event of an
emergency. Install the machine next to a power outlet.
Also, provide enough empty space to allow immediate access to the power
outlet.
Do not hold the dust box cover on
the front of the machine.
Advertisement
Table of Contents
