Changing The Position Of A Spindle Unit - Roland monoFab SRM-20 User Manual

Changing the Position of a Spindle Unit

"Z Cutting Range by Changing the Position of the Spindle Unit"
"
Remove the Spindle Unit
(p. 27)
CAUTION
1.
If there is cutting waste inside the front cover, remove it.
2.
If a material, collet, or cutting tool is mounted on the machine,
remove it.
3.
Move the spindle.
3-1.
[ View ]
Click
3-2.
Move the Z axis to the lowest position.
111
Never touch the spindle unit immediately after
machining.
Doing so may cause burns.
of VPanel.
What to Do If...