Loading A Workpiece For Cutting; Installing The Machine Vise; How To Secure A Workpiece In The Machine Vise - Roland CAMM-3 PNC-300 User Manual

6. Loading a Workpiece for Cutting

Installing the Machine Vise

Tighten the screw
by hand

How to Secure a Workpiece in the Machine Vise

1
Place the workpiece on the XY table, and move the
machine vise so that it lightly touches both sides of
the workpiece.
3
Use the wrench to secure machine vise B.
10 mm
(0.39")
Machine vice A
2
Use the wrench included with the unit to secure
machine vise A.
10 mm
(0.39")
4
Secure the workpiece in place.
Machine vice B
9