Confirm The Total Spindle Motor Rotation Time - Roland monoFab SRM-20 User Manual

Confirm the Total Spindle Motor Rotation Time

The total time of rotation of spindle motor can be checked by VPanel. You
can reference for getting to know replacement time.
Usage example
Avoiding stoppages during cutting
You can check whether the spindle motor that is currently in use has a long
enough work life remaining to complete the cutting operation that you
have planned. This enables you to avoid situations in which the spindle
motor stops working during cutting.
Economic usage
You can check whether there are any spindle motors available that have
enough of a work life remaining to efficiently complete the cutting
operation that you have planned. This enables you to use spindle motors
economically.
CAUTION
When replacing the spindle motor, if you forget to change the motor
number or forget to perform a reset, the current working time will be added
to the working time of the motor before being replaced, and you will be
unable to manage the working time.
1.
Click at the upper left of a screen, and click [ Maintenance].
2.
Check the total spindle motor rotation time.
The total time of rotation of the spindle motor is displayed.
Reset the Total Rotation Time of Spindle Motor
Reset the total working time for the selected number. Click
confirmation message is displayed. Click
undo a reset operation.
97
Replacement of the Consumable Parts
[Reset]
and a
[OK] to finish the reset. You cannot