Step 3 : Set The Origin Point Of The Model And Orientation - Roland monoFab SRM-20 User Manual

〇〇●〇〇〇〇〇〇

STEP 3 : Set the Origin Point of the Model and Orientation

Origin point of the Model / Origin point
•
Origin point of the model : XY origin point set up on cutting data ( The origin point on the data of MODELA Player 4 )
• Origin point : XY origin point set up on the machine ( Can be set anywhere in the cutting area )
Relation between the origin point of the model and the origin point
Set up the origin point of the model and the origin point of the machine to become the same position.
Origin point : Center
Origin point of the model : Center
Origin point : Lower left
Origin point of the model : Center
OK
NG
36
Create Cutting Data By MODELA Player 4