Step 1 : Attach The Material To The Table - Roland monoFab SRM-20 User Manual

●〇〇〇〇

STEP 1 : Attach the Material to the Table

1.
Mark the location that will be the origin point of the material.
2.
Stick double-stick tape on the material.
An adhesion side is made large so that the material may not separate during
cutting.
3.
[View]
Click of VPanel.
4.
Attach the material to the table.
MEMO
If you mount it in a position in the front, the work will be easier.
Y
X
70
Cutting (One Side Cutting)