〇●〇〇
STEP 2 : The Machine Run-in
When the machine must be run-in
•
When the machine is first set up
•
When the consumable part is replaced
•
When the machine is not used for a prolonged period
Go to the
"STEP 3 : Confirm the Command Set"
machine does not need to run-in.
(p. 65), when the
1.
If a material, or cutting tool is mounted on the machine, remove it.
2.
Start VPanel.
(p. 11)
""Start VPanel"
3.
Click
at the upper left of a screen, and click [Maintenance].
63
Preparing the Machine