Uninstalling The Driver - Roland monoFab SRM-20 User Manual

9.
Disconnect the USB cable that is connected to the printer, and then
restart Windows.
10.
Uninstalling the driver for the relevant device.
11.
Follow the procedure "Uninstalling the Driver"
the driver.
12.
"Installing the Driver"
Follow the procedure
"http://startup.rolanddg.com"
"
Windows 7
1.
Use a USB cable to connect the machine and the computer, and
then turn the machine on.
2.
If the "Found New Hardware"
close it. Disconnect any USB cables for printers other than this
machine.
3.
On the taskbar, click [Start], and then right-click [Computer]. Click
[Properties].
4.
Click [Device Manager]. When the
box appears, click [Continue].
The "Device Manager" window appears.
5.
Click [Show hidden devices]
6.
Double-click [Printers] or
model name or [Unknown device], whichever appears below the
item you selected.
(p. 106) to uninstall
to install the driver again.
wizard appears, click [Cancel]
"User Account Control"
on the [View] menu.
[Other devices] in the list. Click the
7.
Click [Delete]
8.
In the "Confirm Device Uninstall"
driver software for this device.]
"Device Manager."
close the
9.
Disconnect the USB cable that is connected to the printer, and then
restart Windows.
10.
Uninstalling the driver for the relevant device.
Follow the procedure
11.
Follow the procedure
"http://startup.rolanddg.com"
"

Uninstalling the Driver

to
Follow the appropriate procedure below to uninstall the driver.
Windows 8/8.1
1.
Turn the machine off, and disconnect the cable that is connecting
dialog
the computer and the machine.
2.
Log on to Windows as
3.
Click [Desk top].
4.
Move the mouse to the lower right corner to display Charm and click [Set].
106
on the [Action] menu.
dialog box, select
check box, and then click
"Uninstalling the Driver"
"Installing the Driver" to install the driver again.
"Administrator."
What to Do If...
the[Delete the
[OK]
to
to uninstall the driver.