Run In The Spindle - Roland monoFab SRM-20 User Manual

Run in the Spindle

After replacing the spindle unit and spindle motor, run in the spindle.
Failure to run in the spindle may result in unstable spindle rotation.
Procedure
1.
Start VPanel.
2.
Move the slider to [ Low].
3.
Click .
• Guide : Approx. 5 minutes
4.
Move the slider to the center.
•
Guide : Approx. 5 minutes
5.
Move the slider to "High."
•
Guide : Approx. 10 minutes
6.
Click ,when the guide time passes.
MEMO
We recommend resetting the total working time or changing the
management number in VPanel after replacing the spindle motor.
""Reset the Total Rotation Time of Spindle Motor"
98
Replacement of the Consumable Parts
(p. 97)