Roland monoFab SRM-20 User Manual page 76

Cut the Only Selected Process
Select the unnecessary process, click
Only the orange processes
[Enable/Disable Cutting].
will be output.
Pausing / Resuming
[Pause] of VPanel. The display of a button changes to [RESUME]. Click
Click
[RESUME] to resume.
Cleaning during an extensive cutting operation (X,Z-axis)
If cutting waste accumulates during an extensive cutting
operation, the machine's operation may be hindered,
resulting in a product that does not meet expectations.
Keep an eye on how much cutting waste builds up and
pause the machine to remove the cutting waste that has
built up around the X- and Z-axes before the movement
worsens. Also remove the cutting waste of a dust tray.
[Pause]
If you when the cutting tool is not touching the
material, traces of cutting will be less likely to remain on
the material.
76
Cutting (One Side Cutting)