Think How Best To Cut The Object; The Method Using Rotary Axis (4 Axes); Combined Cutting; The Method For Two Sided Cutting A Solid Object Using Supports And Frame - Roland MDX-40A Step-By-Step Manual

Think how to cut the object
Think of the most appropriate method of cutting, taking into account model shape, material
characteristics, machine cutting dimensions and capability of the software.
Making a prototype using one side cutting only
One side cutting, which creates a solid model by cutting
two separate components is the simplest method for
creating a model.
Single side cutting can make full use of the cutting machine's
table to create larger models and eliminates the need to
remove support material.
Gluing the two components is necessary after cutting.
Accurate alignment of the two components is critical.

The method for two sided cutting a solid object using supports and frame.

This method adds supports and a surrounding frame to
the 3D data and manually flips the frame to cut both sides.
No need to split the original design, no alignment
issues and no gluing required.
Careful removal of the model from the supports
and hand finishing required.
The method for two sided cutting a solid object without supports and frame.
This method requires you to create a support base for the pre-cut side
of the model to allow you to cut the second side.
Finished models will be smooth and without the need to
remove any supports. Alignment should be accurate.
Preparing an accurate and stable support base for the pre-cut
side may be time-consuming. Additional fixing such as glue or
putty may be required.
The method using rotary axis (4 axis).
This method uses the ZCL-40A rotary axis to automatically
rotate the model in order for you to cut from multiple angles.
A simple method for cutting multiple sides. This makes it easier to
create accurate complex models.
Cutting area is limited to the rotary axis' acceptable material size.

Combined cutting

Some objects may require you to create separate components using a combination of the
above cutting methods.
MDX-40A+Step-by-step guide
Step1+One side cutting
56789:;+<$=>8?@8A$=>1B(*'=
<$=>.+CD&1A*'='1)($$*#B
ZCL-40A+Step-by-step guide
Step,+Basics
ZCL-40A+Step-by-step guide
Step.+
Cutting utilizing the area
4