Table of Contents
Advertisement
4
4
Part
4-1. The Cutting Area
Maximum Cutting Area (When ZS-650T Is Installed)
Important Points About the Cutting Area
The range that can actually be cut is limited by the following factors, which make it narrower than the range described above.
• Amount of tool extension
• Interference between the rotary axis unit or workpiece retainer attachment and the tool or spindle unit
• Interference between the loaded workpiece and the tool or spindle unit
Special care is needed when you attach square material as the workpiece, because the corners may easily strike the tool when rotating the
A axis.
Loading Material
Max. 410
8
Max. 385
8
Unit: mm
15
Advertisement
Table of Contents
