Step 3: Attach The Spindle And Cylinder; Attach The Spindle And Cylinder - Roland ZAT-540 User Manual

2-4 Step 3: Attach the Spindle and Cylinder

Attach the Spindle and Cylinder

Procedure

Grommet
Motor cover

 Detach the motor cover.
 Remove the grommet.
Remove the existing spindle and
spindle holder.
Important Note When Removing the
Spindle Holder
A thin spacer (shim) may be present be-
tween the spindle holder and the Z-axis
rail slider. Reinsert it in its original location,
without removing it (step 4). This shim is
designed to improve the installation ac-
curacy of the spindle.
Z-axis rail slider
Shim: This must not be removed.
Chapter 2 Basic Operation 39