Running In The Spindle (Warm-Up) - Roland DWX-51D User Manual

Running In the Spindle (Warm-up)

To stabilize the rotation of the spindle, a spindle run-in (warm-up) may be needed.
Cases Where You Need to Perform This Task
When you finish installing the machine

When the spindle unit is replaced

When the machine is not used for a prolonged period

Before you start using the machine in low room temperature

Procedure

Close the front cover and turn on the power.




Show VPanel.
P. 5"Displaying VPanel"

In the top window of VPanel, select the machine
to operate.
Click the radio button to the left of the name of the machine
to operate.
Click .
The [Settings] screen will appear.
Click the [Maintenance] tab.
Click [Spindle run-in].
Click [OK].
Spindle run-in starts.
"Spindle run-in is completed" is displayed.
Periodic Maintenance
37
3. Maintenance