The Power Turns Off After Cutting Ends
Is the Auto-Power-Off Function Set Up?
If auto power-off function is enabled on the power option, the power
automatically turns off when a certain period of time elapses with the
machine idle* .
"Idle"
*
means the state in which the movement of the table and spindle
head is stopped (except when a machining process is paused) .
You can disable the auto power-off function or change the set time .
""Power Option"
(p . 15)
The Cutting Tool Does Not Reach the Material
Are You Using a Scrap Board?
If the cutting tool does not reach the material and cannot cut it, use a scrap
board .
""Cutting Material / Scrap Boards"
(p . 20)
The Driver Cannot Be Installed
If installation quits partway through, or if the wizard does not appear when
you make the connection with a USB cable, take action as follows .
Windows 8/8 . 1
1.
Use a USB cable to connect the machine and the computer, and
then turn the machine on.
2.
If the
"Found New Hardware"
Disconnect any USB cables for printers other than this machine.
3.
On the task bar, click [Start], and then
to the lower right corner to display Charm and click [Set].
4.
[Control
Panel],
[Hardware and
Click
"User Account Control"
When the
"Device Manager"
The
5.
[Show hidden devices]
Click
6.
Double-click
[Printers]
model name or
[Unknown
item you selected.
7.
Click
[Delete]
on the
131
wizard appears, click
[Cancel]
[Desk
top]. Move the mouse
Sound], and then
[Device
dialog box appears, click [Continue].
window appears .
[View]
on the
menu.
or
[Other devices]
in the list. Click the
device], whichever appears below the
[Action]
menu.
What to Do If . . .
to close it.
Manager].