Table of Contents
Advertisement
Specifications
Power Rating and Serial Number Locations
Expansion Connector Specification
*We are not responsible for devices connected to this connector.
+24 V
100 Ω / 2W
This circuit operates when an ON signal is output from
the machine (during milling, ATC operation, etc.).
Be sure to use the connector within the rated range shown above.
Do not apply an additional voltage to the connector.
Do not short-circuit the connector to ground.
46
Serial number
The serial number is required for maintenance,
servicing, and support. Never peel off the label or
let it get dirty.
Power rating
Use an electrical outlet that meets the ratings for
voltage, frequency, and current given here.
Pin 1
Connector
Pin 2
Ic (max) = 150 mA
Adaptive plug
Use a three-contact plug that
meets the size requirements
above.
Do not use terminal
only terminals
and
. Use
.
Advertisement
Table of Contents
