D-Link DGS-1510 Series Web Ui Reference Manual page 97

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
GVRP Status
Join Time
Leave Time
Leave All Time
Click the Apply button to accept the changes made.
GVRP Advertise VLAN
This window is used to view and configure the GVRP advertised VLAN settings.
To view the following window, click L2 Features > VLAN > GVRP > GVRP Advertise VLAN, as shown
below:
The fields that can be configured are described below:
Description
Select the switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Select this option to enable or disable the GVRP port status. This
enables the port to dynamically become a member of a VLAN. By
default, this option is disabled.
Enter the Join Time value in centiseconds. This value must be
between 10 and 10000 centiseconds. By default, this value is 20
centiseconds.
Enter the Leave Time value in centiseconds. This value must be
between 10 and 10000 centiseconds. By default, this value is 60
centiseconds.
Enter the Leave All Time value in centiseconds. This value must be
between 10 and 10000 centiseconds. By default, this value is 1000
centiseconds.
Figure 5-11 GVRP Advertise VLAN window
89